| Item ID |
334764
|
| Manufacturer |
Imagene Technology
|
| Model |
IsoFlow
|
| Part Number |
|
| Description |
Flatbed Reagent Dispenser w/Terminal and 3 Pumps
|
| Made In |
United States
|
| Weight |
|
| Manual |
-
|
| Condition |
Tested
|
| Cosmetic |
Very Good
|
| Qty Available |
1
|
|
Description
Imagene Technology IsoFlow Dispenser with QTerm-J10 Terminal model J008 Software V.1.53 and Thomas Pump model 905CA23TFE-217A
The IsoFlow Dispensers are integrated systems, which precisely dispenses liquid reagents in lines onto membranes for the production of immunochromatographic diagnostic test strips. IsoFlow accurately and repeatedly applies a continuous reagent line onto the solid medium.
The original IsoFlow Flatbed Dispenser can typically produce 6,000 tests per hour. In the most popular configuration the test and control lines are dispensed with LCP nozzles while an atomizing nozzle simultaneously delivers the conjugate to the conjugate pad.
Features:
- Dispense 1 to 8 different reagents/pump simultaneously. Each reagent dispensed is controlled independently. (Unit has 3, p/n 60002, rev B, loc U8)
- Dispense rate set digitally from 0.01 uL/mm to 10 uL/mm.
- Carriage speed set digitally from 10 to 300 mm/second.
- Dispense onto membranes up to 500 mm long and 120 mm wide.
- Completely digital operation. No micrometers or pressure regulators required.
- Minimum spacing between nozzles is 5 mm (standard), 2.5 mm with custom designs.
- Internal vacuum source to hold down membrane.
- Low dead volume - approximately 100 uL of which 60 uL can be recovered when dispensing is complete.
Worth over 15000.00$
|
If otherwise specified, all of our products carry a 30 Day warranty
